Opus Professional TP Digital PA System
The Opus Professional Digital PA system is a 4 wire
matrix switched Low Power PA system suitable
for internal installation in a variety of
applications and also applicable to low
power external installations.
Each PA unit is individually controlled via
a 2 wire digital link, and contains its own
amplifier, AGC circuit and individual volume
control. The units can be daisy chained up
to 16 units per connection, and multiple
sites are catered for with a range of audio
matrices which are compatible with microwave
and fibre connections.
The PA units have a built in noise canceling
microphone with AGC and individual level
controls for the microphone. Peak level
clipping is incorporated to avoid excessive
audio levels when monitoring at high
amplification.
Opus Professional TP Switch & Router
The Opus Professional Switch/Router is the heart of a
distributed Opus Professional system. Field proven over a
period of 11 years with exceptional
reliability, the Opus Professional router is a firmware
device which is responsible for data
distribution over low speed networks.
Each switch/router has 12 data channels and
each data channel can operate at 38,000 baud
giving a very high cumulative data
throughput. Each data channel can have a
unique driver installed, hence one channel
might control a matrix at 1,200 bauds,
whilst another channel connects back to the
centre at 38,000 bauds.
Typically a router would be installed on a
remote site with a single data link back to
the control centre. The remote site would
then have 11 spare data channels for the
control of multiplexers, matrices, pan/tilt
cameras etc. In fact almost any device
capable of being controlled by a serial
connection can be connected to a router.
Where more connections are required, routers
can be interconnected.
The router scheme provides a very economic
and fast solution to the control of large
schemes and as the data network is a star
configuration, offers high redundancy with
no common failure point.
Using identical hardware, the router is used
in the control room with different software
to integrate multiple workstations. Note
that work stations can also be connected at
remote site via the routers, and this
feature is inherent to the Opus system.
Grovedime Ltd and their agents can provide a full
configuration and commissioning service, and
most of this work is carried out off site at
our workshops. This avoids expensive on site
commissioning and we have many examples of
sites that have been fully up and running
and operational within a few hours.
A smaller 5 channel version of the Router is
available which on many schemes can offer a
useful cost and space saving, and we can
also provide add on alarm and relay modules
for various general purpose control and
monitoring.
Opus Professional TP Telemetry Controller
Using the Opus Professional Telemetry Controller the
Opus Professional system can directly position a pan and
tilt camera from the on-screen graphics.
The workstation is aware of the current
camera position and indicates the camera
orientation on the screen and can then
re-position the camera by calculating the
new position from the on screen (to scale)
graphics.
To put it in plain English, if you were to
click on a graphical representation of a
house on the on-screen graphics, then the
PTZ camera would automatically move to
provide you with a view of that house on
your chosen monitor.
This facility can also be provided on some
type of dome cameras.
Privacy zones can quickly and easily be set
up within minutes from the workstation by
anybody with sufficient system access
rights, providing your camera hardware
supports this facility.
The following Opus Professional products are
also available:
*Opus
Professional Advanced Telemetry Controller
*Opus
Professional Alarm and Switching Module
*Opus
Professional Router CO-AX Interface
*Opus
Professional Router USB Interface
*Opus
Professional Router Digital Audio Interface
*Opus
Professional Router TCP/IP Interface
*Opus
Professional Video Matrix (64x128)
*Opus
Professional Camera Titling Unit
If you would like further information on
Opus Professional and associated products
please contact Grovedime Ltd on 01566 779446